Darts is a classic game enjoyed by millions of people all over the world. However, as entertaining as it can be, it can also pose a threat to your wall. The constant throwing of darts can cause damage to the wall, leaving unsightly holes and cracks. If you’re reading this article, it is because you want to know how to protect your wall from darts.
Here, we’ll look at various ways to protect your wall from damage while playing darts, ranging from the use of ready-made products to custom solutions. Whether you’re a seasoned player or just starting out, you’ll find valuable tips that can help keep your playing area safe.
To protect the wall from darts, take the necessary precautions to ensure that the darts do not make direct contact with the wall. There are various ways to protect your wall from darts. Depending on your personal preferences, you can make the dart protection on your wall stand out as part of a decoration or make it less noticeable.
Here are some options for protecting your wall from dart damage:
A Dartboard Cabinet
One of the best ways to protect your wall from stray darts is by installing a dartboard cabinet. A dartboard cabinet is one of the most aesthetically pleasing protections for your wall and it also protects the dartboard. These cabinets are available in different sizes and the larger the cabinet, the more wall space it protects. That being said, a dartboard cabinet cannot cover all parts of the wall, so some places may remain exposed.
The dartboard cabinet may not be the best option for beginners whose aim may be way off or inconsistent. So if you’re a beginner, it is best to combine the use of the cabinet with other dartboard wall protectors for maximum wall protection.
Follow these steps to install a dartboard cabinet:
- Choose a dartboard cabinet that fits the size of your dartboard and has a suitable style for your game room.
- Assemble the dartboard cabinet, following the manufacturer’s instructions.
- Mount the dartboard on the cabinet.
- Attach the cabinet to the wall using nails or screws as fasteners.
Tip: You can store other dartboard components in the dartboard cabinet and also use it as a scoreboard.
A Dartboard Surround
You can also use a dartboard surround to keep the dart tips from scratching your wall. A dartboard surround is a foam border that fits around the dartboard, and it works for both bristle and electronic boards. Unlike dartboard cabinets, a dartboard surround does not require any mounting or installation. It takes just a couple of minutes to put it on and take it off again when you’ve finished playing.
The dartboard surround is designed to hold stray darts. Darts pierce the dartboard surround and stick to it rather than piercing the wall or falling to the floor. To ensure optimum wall protection, make sure that the dartboard surround is at least 1 inch (2.5 cm) thick. You can also select a wider surround board to cover a larger portion of the wall. A dartboard surround doesn’t cover every part of the wall, so if you’re a beginner, consider adding additional protection.
Here are the steps to using a dartboard surround:
- Choose the appropriate dartboard surround for your dartboard.
- Install the dartboard on the wall following the manufacturer’s instructions.
- Place the surround around the dartboard, making sure it is properly aligned.
- Attach the dartboard surround to the wall using the mounting hardware.
Read our blog to learn how to play darts.
DIY And Custom Solutions
Instead of using a dartboard surround or cabinet, you can try out some DIY solutions if you love handy work. Some of the custom solutions that can protect your wall from darts include:
You can use cardboard to prevent damage to your walls when playing darts. Although using cardboard isn’t the best solution, it is an affordable way to protect your wall from dart hits. For this method to be effective, you must have enough layers of cardboard, as cardboard tends to be soft, which allows steel and metal tipped darts to penetrate it. A great thing about using cardboard as backboards, however, is that they are easy to make as well as dismantle.
To use cardboard for this purpose, you can cut it to the desired size and attach it to the wall behind the dartboard using thumbtacks. If you’re a beginner, allow the cardboard barrier to cover a larger portion of the wall to give room to accommodate any occasional dart that strays far off.
Another way to protect your wall from dart piercings is by using styrofoam. Styrofoam, also known as polystyrene, is a resin that is often used for cushioning and other insulation practices. A styrofoam backboard prevents steel tip darts from piercing your wall when they miss the dart board.
Follow these steps to use styrofoam to protect both your walls and darts:
- Measure the area behind the dartboard where you want to attach the styrofoam.
- Cut the styrofoam to the desired size, using a serrated knife or a hot wire foam cutter.
- Clean the wall surface to remove any dust or debris.
- Apply adhesive tape to the back of the styrofoam and attach it to the wall.
- If desired, you can use additional layers of styrofoam for added protection.
Styrofoam is flammable, so you must avoid using it near any open flames or sources of heat.
Wooden Boards And Old Doors
Do you have wood boards or old doors lying around? You can also use them to shield your wall from darts. Anything from old room doors to cabinet doors and wooden planks is good enough for this task. We recommend using wood, as it guarantees maximum protection for your wall and prevents damage to the dart tips. Doors and wooden boards also cover a wider area of your wall.
Here’s how to use a wood board or an old door to protect your wall from darts:
- Measure the space behind the dartboard where you plan to attach the wood board.
- Cut the boards or door to appropriate sizes, using a saw.
- Sand the edges of the boards to remove any rough or sharp edges.
- Remove any dust or debris from the wall surface.
- Attach the boards to the wall using wood glue or mounting adhesive.
- Secure the boards in place using nails or screws.
- You can paint or finish the wooden boards to match the room’s wall or decor if you desire.
Check out the best darts in our review.
Using ceiling tiles is another possible way to protect the wall from darts, as they provide a hard, dense surface that can help absorb the impact of the darts.
Here’s how to use ceiling tiles to protect a wall:
- Cut the ceiling tiles to the desired size, using a saw.
- Clean the wall surface to remove any dust or debris.
- Apply adhesive tape to the back of the tiles and attach them to the wall.
- If desired, you can add additional layers of tiles for added protection.
It is important to note that the tiles may not provide adequate protection against the impact of the darts, especially if they are not dense enough. Before installing ceiling tiles, it’s a good idea to test their suitability on a small area of the wall first.
You can consider adding extra insulation to your wall to protect it from dart damage. Any type of insulation will work for this method, as the insulation material will serve as a cushion between the wall and the dart.
Some of the best insulation materials that can help keep dart holes out of your wall include:
- Fiberglass: Fiberglass is commonly used in residential and commercial construction and is known for its affordability and amazing insulation properties.
- Foam: Foam insulation is available in several different forms, including spray foam, rigid foam board and blown-in foam. It provides great insulation and it is also affordable.
- Cellulose: Made from recycled paper products, cellulose is known for its good insulation value, sustainability and affordability.
- Mineral Wool: Mineral wool is another durable material that you can use to protect your wall while you play darts.
- Natural Fiber: Natural fiber is made from materials such as wool, cotton and hemp. It is eco-friendly and works well for insulation.
Proper positioning is important when picking a spot for your wall protector. Consider the common places darts affect, such as around the dartboard, and put the cushion there.
Using carpet to protect a wall from darts is another great idea, as it provides a soft, cushioned surface that can help absorb the impact of the darts.
- Cut the carpet to the desired size, using a sharp knife or scissors.
- Clean the wall surface, so that carpet can stick properly.
- Use an adhesive tape of glue to attach the carpet to the wall.
- Attach multiple layers of the carpet for the best results.
Towels, Blankets And Old Clothes
Your old clothes, towels and blankets can also do a good job of protecting your walls. Although these are not the best materials if you want to keep dart holes away from your walls, they are great as makeshift options. Attach the clothes, towels or blankets to the wall around the dartboard. Make sure the fabric you choose is thick enough to keep the dart from piercing the wall.
Frequently Asked Questions
What Is The Best Way To Protect The Wall From Darts?
The best way to protect the wall from darts is by using dart cabinets or dartboard surrounds. A dartboard cabinet is a specialized piece of furniture that you can install on the wall to catch darts that miss the dart board. A surround requires no installation. You simply have to place it around the dart board to catch stray darts.
Do Soft Tip Darts Damage Walls?
Yes, soft tip darts can damage walls if they are not used properly or if the wall material is not suitable for this type of play. Install dartboard cabinets or use dartboard surrounds to ensure that a stray dart doesn’t make direct contact with the wall. You can also try DIY solutions like cardboard and rope.
How Do You Protect The Floor When Playing Darts?
You can protect the floor when playing darts by using a dart cabinet or a dartboard mat. A dart cabinet helps protect your wall and also keeps darts from falling on the floor. When using a dartboard mat, simply place the mat in front of the dartboard to catch any missed throws. Another alternative is to use a cork board to catch missed darts.
How Do You Anchor A Dartboard To The Wall?
To anchor a dartboard to the wall, you need to find a sturdy part of the wall. Measure the height of the dartboard and mark it on the wall. Drill holes into the wall at the marked location, insert wall anchors into the holes and screw the mounting bracket for the dartboard onto the wall. Finally, hang the dartboard on the mounting bracket, making sure it is securely attached and level.
What Is A Lifespan Of A Dartboard?
The lifespan of a dartboard is usually between two and five years. It depends on several factors, such as the frequency of use, the quality of the board and how well you maintain it. Inspect the board regularly and replace it when necessary to ensure a safe and enjoyable playing experience. You can install a dartboard cabinet to protect your dartboard and its components.
Keeping the darts from damaging your walls is important for both safety and aesthetic reasons. The tips in this article will help you protect wall from darts when playing, so you don’t degrade the appearance of your home. You can use any of the readymade wall protection tools or try the more affordable DIY methods that we discussed.