Menu Close

Air Hockey Puck Size – Common Dimensions, Weight And Shapes

Air Hockey Puck Size

Are you in need of some replacement pucks for your air hockey table, but you’re not sure whether to get a small puck or a large puck? Perhaps you’re not even sure what options are out there. Either way, you’re in luck! This article will tell you all about air hockey puck size and how to choose one that’s the right match for your table. While most pucks are 3.25 inches (8.2 cm) in diameter, there are a variety of sizes that work best with different air hockey tables. With the right pucks, you can bring life back to your game room and play as many games of air hockey as you like.

Air Hockey Puck Sizes
  • 2.5-Inch (63 mm): A small puck suitable for air hockey tables for kids around 5’ – 6’ in size (1.5 m – 1.8 m).
  • 3-Inch (76 mm): An in-between size that works for smaller tables around 6’ – 7’ (1.8 m – 2.1 m).
  • 3.25 (3 ¼) Inches (82 mm): A standard size puck for large 7’ air hockey tables.
  • 3.5-Inch (88 mm): This is the size used in professional air hockey for 8 foot (2.4 m) tables.

See the charts below for more precise information. If you don’t have your own table yet, check out this review of the best air hockey tables.

Air Hockey Table Size And Puck Size Compatibility

Air Hockey Table Compatibility
Ideal Air Hockey Puck Diameter
8 foot
80 mm or more
7 foot (regulation)
75 – 85 mm
6 foot
65 – 70 mm
5 foot
50 – 55 mm
4 foot
50 mm or less

Air Hockey Puck Size
Air Hockey Table Size
3 1/4″
7 ft and 8 ft tables
2 15/16″
7 ft tables
2 3/4″
6 ft tables
2 15/32″
5 – 6 ft tables
5 ft tables

Fan Quality

If you have a lower quality table, its fan may be weaker. In that case, a smaller and lighter puck is best. In many cases, cheaper tables are also smaller, so you can still follow the above guidelines. However, if you have a full-sized table with a weak fan, try a puck that is one size smaller. You can also learn how to make your puck glide across the table better here.

The weaker the fan is, the lighter the puck should be so that it can float properly on the table surface.

Differently sized pucks can weigh anywhere between 22 – 42 g (0.7 – 1.4 oz). See below for more precise estimates.

Air Hockey Puck Weight

Puck Size
Average Weight
3 1/4″ (83 mm)
40 g
2 15/16″ (75 mm)
36 g
2 3/4″ (70 mm)
34 g
2 15/32″ (63 mm)
30 g
2″ (50 mm)
22 g

Small Vs Large Air Hockey Pucks

Small Vs Large Air Hockey Pucks

If your puck is too large, it will move slowly because the fan won’t be strong enough to support it and scoring will be too easy. On the other hand, an undersized puck will be hard to control and it may fly off the table due to the fan’s strength. If your puck moves too slowly but you know it is the right size, your table may be dirty. Learn how to clean an air hockey table here.

While your puck shouldn’t be too big or too small, you can go very slightly above or below the recommended size. A smaller puck will make the game faster but harder to score, while a larger puck will mean you need to play with more force but it will be easier to control. If you’re looking for a smaller table, check out these small air hockey tables.

Air Hockey Puck Shape

While the traditional shape is round, air hockey pucks come in lots of other shapes, including triangle, hexagon, octagon or square.

Playing with different shapes can be fun, but circle pucks are the only ones approved in official tournaments.

Air Hockey Puck Material

Air hockey pucks come in a variety of colors, but almost all of them are made from 100% lexan plastic. This is a form of molded plastic that is light enough to pick up speed and be carried by the table’s blowers.

Quiet Air Hockey Pucks

Some players get annoyed by the clattering sound when pucks hit the table edge and go for “low-noise” pucks made from softer plastic. However, these are slightly springier.

Mallet (Striker) Size

Mallet (Striker) Size

Air hockey mallets are all circular and have a handle in the center. It’s best to choose the size of the puck first and then get a mallet that matches. They usually come in a set with the pucks so you probably won’t have to worry about the size.

Below is a table showing the common puck sizes and the ideal mallet size for them.

The Common Puck Sizes And The Ideal Mallet Size Table

Puck Size
Best Mallet Size
3 1/4″ (83 mm)
3 3/4″ (95 mm)
2 15/16″ (75 mm)
3 3/4″ (95 mm)
2 3/4″ (70 mm)
2 15/16″ (75 mm)
2 15/32″ (63 mm)
2 15/16″ (75 mm)
2″ (50 mm)
2 9/16″ (65 mm)

Small Vs Large Mallets

Most air hockey mallets have a 3 3/4″ (95 mm) diameter, but smaller sized mallets are available, usually 2 15/16″ (74 mm) in diameter. In general, full-sized mallets should go with full-sized pucks and smaller mallets with smaller pucks. However, you can choose a slightly larger or smaller mallet if you want a particular game play. A larger mallet will make your games easier as it provides more power and control. In contrast, a smaller mallet makes for more challenging games as they require more precision.

Why Weight, Size And Shape Matter?

Why Weight, Size And Shape Matter

Weight, size and shape matter because they influence the effectiveness of the table. A too small puck is likely to be too light and will thus be hard to control. The fans may even cause it to fly off the table. However, a too large puck may be too heavy for the blowers and also make the game too easy.

What Pucks Do Professionals Use?

Professionals use large pucks that are 3.5” (88 mm) in diameter. This is the official size used in tournaments on large tables of 8 feet (2.4 m). However, this size is rarely seen in home tables. Full sized tables for the home are usually 7 feet (2.1 m), which suits a 3.25” (82 mm) puck best.

Frequently Asked Questions

There are different sizes of hockey pucks. The largest puck you can get is 3.5 inches (88 mm), generally only used in professional competitions. However, the most common size you will see is 3.25 inches (82 mm), suitable for a large table of 7 feet (2.1 m). The other two common sizes are 3 inches (76 mm) and 2.5 inches (63 mm), suitable for small tables.

The size of a puck is between 2 and 3.5 inches (50 – 88 mm), depending on the size of the table. A 2” (50 mm) puck is suitable for a 5’ (1.5 m) table, a 2.5” (63 mm) puck for a 5’ – 6’ (1.5 – 1.8 m) table, a 3” (76 mm) puck for a 6’ – 7’ (1.8 – 2.1 m) table and a 3.25” (82 mm) puck for a 7’ (2.1 m) table. A 3.5” (88 mm) puck is used in competitions on official 8’ (2.4 m) tables.

The best air hockey pucks are made of a plastic called lexan. This molded plastic is light enough to pick up speed and be carried by the table’s blowers. However, it can be quite noisy, so some players opt for a softer plastic that is quieter. This plastic is also springier, which will affect the gameplay.


It’s important to choose pucks that are the right size to match your table. If you don’t, they may go flying off the playing surface or move much too slowly. Having read this article, you should now know everything you need to know about air hockey puck size. Hopefully, that means you can buy new pucks with confidence!

Leave a Reply

Your email address will not be published.